Category : Tools

It was a great feeling to unwarp the package and find a nice swanky Dremel in it. I have never had the opportunity to use one, though the closest I came to using a rotary tool was the Bosch Engraver. So I was excited. Given that it is such a versatile tool with so many purposeful attachments, I wanted to see how best I can use it for my day to day work. Nothing like getting to review a product by using it for my own daily work, right ? And so I had to take my own sweet time until now.

Before looking at the application, here’s a little something about the Dremel Micro. It is a very compact, rotary multi-tool that comes with various modular attachments that you can use based on your requirement. The Demel tool works by rotating at high speeds and by using the appropriate attachments one can drill, grind, sharpen, cut, clean, polish, sand, route, carve, engrave and more. It is a very handy tool that one can hold like a pen and perform the required activity . The 5 different speeds allow the user to gain more control over the tool depending on the application.

Dremel Micro comes with a sleek charging pad and a 7.2 V lithium ion battery that lasts for more than 4 hours. It has no cords and that is an added plus. The LED lights in the nosecap make it easier to work on intricate surfaces Now for the attachments that it came with. While I had use for some of them, I tried using few and I could not find means to use the rest. Each of the accessory is attached to a mandrel that can be easily removed and replaced. Here’s the list of attachments and the application. 

Drum Sander

Earlier last month, we were participating in an exhibition and I struggled to make the base for my HALO series lampshades. I managed to make two. But I still needed to make 8 more and that is where I thought I would put the Dremel Micro to good use. My biggest challenge was to slightly round the edge of the base which was taking me time with hand. The drum sander attachment came in handy and I was able to complete the other 8 much quicker.  

Metal cutting wheel

The other issue I had was to cut the SS pipes using hack saw blade. While it did work, it took me lot of time to cut through from one end to the other. The metal cutting wheel, that comes with an easy, quick change system called EZ SpeedClic, came to the rescue. It took me some time to get the knack of it, but it certainly helped. With sparks flying around, one should be cautious and ensure safety masks are worn.

Aluminium oxide grinding stone

Something I have long been looking for. Finally used it to sharpen my carving knife and chisel. The rotating stone rubbing on the metal sends sparks flying around, so make sure you cover your eyes up. Wear gloves if you must.

Silicon Carbide Grinding Stone

This one was pretty exciting for me to use. I have always wanted to try etching on glass and have been exploring options. I did not have real purpose for it at that moment, and so I went about trying it out in a bottle of pickle. And look what I ended up with. I could have done a better job had I used a template or did an outline before trying to etch. This is what my free hand expertise could manage. Nonetheless, I was quite happy with how easy it was for me to etch the W. Caution : Wear safety goggles and a mask.

High speed cutter

Given that I had worked with the Bosch engraver earlier, this attachment excited me. It is in my vision to start either engraving or etch the WOODOOZ logo in all my products and so these two attachments have been of special interest to me. Again, I went about randomly trying out on a piece of pine wood. I had trouble moving the tool against the grain, but I feel a trained hand would be able to do this with ease. A handy tool for someone who is into carving too. Some of my clay carving friends might find use for it. Works well on metal too.

Cut off wheels

The cut off wheels are made of hard abrasives and are ideal for cutting metals, wood and ceramics. This is particularly useful if you want to cut off a portion of a screw, bolt or a nail from your WIP projects. 

Nylon bristles and polishing wheel

The Dremel Micro comes with a polishing compound that is ideal for polishing metals and plastics. I had few silverwares on whiich I tested it and it did wonders. You can either use the nylon bristles or the polishing wheel, take a bit of the polishing compound and run it along your silverware and watch it do wonders. I was surprised at the luster that it added to the spoon that I tested it on. Surely a winner attachment at home given that there is lot of metal polishing that is waiting to be done.

On the whole, the Dremel Micro is a very functional tool for a DIYer. Priced at a little less than 17K, I strongly believe only serious DIYers would give it a due consideration. The one and off DIYers would still want to manage with low cost options like hand sanding, using hack saw, and other means to getting their work done. With routing and saw attachments being available, the Dremel Micro can truly be a tool that can replace most other tools. I am falling in love with it and finding it extremely useful for my needs as I keep working more on it. Happy that I could lay my hands on it. 

You can buy the Dremel Micro from Amazon

P.S. This is a sponsored post. However, the views expressed are my own and based on my use of the tool.

Note : Updated with video and a note on ease of use of the tool (4th Feb, 2016)

"For drilling hole into a wall all by ourselves, do you use the local drill or any other branded one? When I checked the nearby hardware shop, they all had drill above 2k+ nothing for 700 or 1k. Any latest updates on which drill to use? Does it really need strength or can I handle it myself without disturbing my husband?" - A reader's query in Facebook

Before getting into the electric drill itself, it is important to understand what is it that makes drilling into wall seemingly difficult. The most common composition of a wall in our homes is an underlying brick wall covered by a certain thickness of concrete. It is drilling into the concrete layer that is quite a task, and once we penetrate that, eating into the brick level is cake walk. The choice of drill is primarily based on the application and your day to day needs. Based on my own experience in using an electric drill, the following are the major two categories that I would recommend for your home use. There are various brands, and these drills are available at various costs, and that is out of scope of this post.

Rotary Drills

    This is the basic form of electric drill. When turned on, the chuck to which the drill bit is attached rotates. The rotating bit then has to be placed on the spot where a hole needs to be drilled. As the bit cuts into its target, it is completely up to the user to apply the necessary pressure to provide the thrust to dig deep into the surface. 
    I use a very basic rotary drill that rotates in the clockwise direction and in a single speed. Because the force to drive the drill bit into the surface comes from the user, it is really not suited for thick concrete walls, particularly the external nine inch walls. It has been perfect for all my internal needs, especially for all the wall hanging work at home. I have tried using this drill on "certain" walls, miserably failed and then sought professional help. The rotary drill is ideal for basic masonry drilling (not so thick concrete layers), your DIY projects and other woodworking needs, particularly for drilling pilot holes, counter sinking etc…

Impact Drills

    The only difference here is that the thrust for breaking into the surface does not come from the user, but from the impact of a built in hammering action. It relatively eases the effort on the user by eliminating the need for him / her to apply pressure while the drilling is on. These drills are also called hammer drills. While they easily serve your DIY / Woodworking needs, they are ideal for all your masonry requirements, particularly drilling into concrete walls.
If you need these drills to drive screws, you will have to look for features like multiple speed options, clockwise and counter-clock wise (from removing a screw) rotating capabilities. The other varieties of drills I feel are high end and are more suited for industrial and professional uses. And to answer the question whether one can use it without disturbing ones husband, I would like to inform you that a teenager, with adult supervision, can easily get around to master using this tool. And so, if you are an adult yourself, man or a woman, this is your tool as much as it is anyone else's. So go ahead and get yourself one and kick start your DIY journey.

Do you own an electric drill at home ? What brand ? What are its features ? What do you use it for ? And most importantly, do you think women can use it without disturbing their husbands ? Leave me your comments.
Meanwhile, here is an external link to Vinay's blog post that explains how to hammer a nail into concrete
- Somu 
Did you like this post ? Enter your E-mail address and join our growing E-mail list

You may also be interested in

Honestly speaking, not much DIY is happening at home. Chennai is at its hottest best and sadly the worst is yet to come. Locking ourselves up in an air conditioned room is the most popular activity that is going on for some time and that gave us the chance to catch up with few horror movies we always enjoy watching together. Meanwhile, Bosch India invited entries from DIY enthusiasts to showcase their DIY works. And considering it was very relevant to what we do here, I sent a load of entries to them. Not that I am indulging in any vanity here, but the contest rule clearly stated that I have to be posing alongside my project.
My Woodworking projects
Posing with my DIY projects
In fact, I sent few more entries too. But, only the following were shortlisted.
There were other entries too from other hobbyists and it was wonderful that one of our entries was chosen as a winner.  And here’s what they had to say about the entries:

“We are delighted to see the kind of DIY skills our participants showcased through their #DIYProjects. With so many amazing #DIYProject entries it was hard to narrow down to three winners. Hence we decided to announce not three but four winners. Congratulations to all the winning entries!”
Winnders of MyDiyProject Contest
The #MyDiyProject winners
If you have been following Bosch India, you would by now be aware of their DIY Square in Bangalore. While I have only had the opportunity to read about it, it does seem like a go to place (And I have it in my agenda during my next Bangalore visit) for folks who want to try their hand at power tools and get some first-hand do it yourself experience. Not surprisingly, I received a Dremel Engraver as a gift couple of days after the winners were announced. Not surprising because there have been lots of workshops happening over the last few months at their DIY Square and the Dremel has extensively been the product of attraction.

The Dremel Engraver in their own words - "An engraving tool with variable depth control, for engraving on a wide variety of materials like metal, glass, wood, plastics, ceramics, etc. This kit also includes a letter & number template for easy engraving of letters & numbers."
Engraving tool - Dremel
Bosch Dremel Engraver and my experiment with it
I have been playing with the Dremel over the weekend and I am yet to get the hang of it. I still don’t know what kind of projects I would be using it on, but I intend to experiment with it more and put it to best possible use. I do have some thoughts, but need to gain more expertise in using the tool before I can even start executing the project. Will share it here as soon as I start giving life to those unexplored ideas. Meanwhile, it has been a long time and a comment from you would be really nice. :-)

Disclaimer : Do note that I received the Dremel as a gift for winning the contest hosted by Bosch India.This is not a tool review or a sponsored post. I was not contacted by Bosch to write this post.This is part of the series where I write about the tools that I use (/intend to use) for my home DIY projects. You can read about the other tools that I use by clicking this link here

Disclaimer 1 : This is neither a tool review nor a sponsored post. I have not been contacted by anyone to write this post. This is part of the series where I write about the tools that I use for my home DIY projects. You can read about the other tools that I use by clicking this link here.

Owning a tool or not having the skill to use one is probably one of the hurdles in DIY in India, and am sure many of you would agree. This is a reason why I invariably outsource the cutting wood activity to someone at the timber store.  It has always been easy that way. Give the dimensions and be done with it. But, with my side table, I was left with a challenge. I needed to have the plywood top cut to the exact dimensions as the frame inset measurement. The challenge though was that the frame was not fixed exactly at 90 degrees, which meant, giving the dimensions to have the plywood cut may not really work.

This is when I decided to take the task upon myself, and took out a tool gift that I received couple of years back – The oscillating multifunction power tool. I have used the tool earlier but I was not ready to write about it here until I was fully convinced that I could use it for a real project. Before I put it up here, I wanted to be sure that I am able to use the tool to suit my DIY needs at home. So, finally I braced myself and cut the plywood (12mm thick and 18 inches in length) in less than 5 minutes and the result is here for all to see.
Another DIY tool for home woodworking
Oscillating multi-function power tool
The concept behind the tool is quite simple. It comes with a spindle to which you can attach the required cutter / blade / other attachments. When powered on, the spindle oscillates back and forth at an astounding speed of 21k oscillations per minute (may vary from product to product). Imagine using a saw to cut wood and your one up and down manual motion of the saw as one oscillation. This tool can do 21,000 of those in just a minute. With the right angle, and the right pressure applied onto the wooden surface, getting your work done is a piece of cake. The plywood cut came out so perfect that I was kicking myself for not using the tool earlier.

Recommend reading : Some basic things to take care of before you start using a tool or even a kitchen accessory from the United States of America
Home DIY woodworking tool
Oscillating tool and the blade accessory
The accessories / blade attachments are sold separately and there are quite a few attachments available for various activities like cutting wood, pipes, removing grouts, sanding etc… (hence the name multi-function)  I only have an angled cutter that is now coming in handy for my DIY cutting needs. This now gives me the confidence to move from smaller projects to medium sized projects.  But the biggest advantage I see is that I can eliminate the dependence on timber stores for my home needs. I would have loved to do a video. Nonetheless, I am leaving you with a link to Youtube videos that talk about the tool’s versatility.
home based woodworking hobby
Trying the oscillating multi-function power tool
I would like to thank my cousin Raji for this gift and want to tell her that I have started fully using the tool. The official site claims that this is a tool suited for home DIY and hobbies and I fully agree. This is certainly a valuable addition to my tool kit which is mostly only hand tools, barring my electric drill and I highly recommend it for a budding home DIYer like me.

Disclaimer 2 : I am merely posing for the photo. Please exercise caution and ensure you read the user manual for the correct way to hold and use the tool. Also ensure you take precautionary safety measures before you start working on a DIY project using the tool.

When we worked on our first ever center table (which is also our first ever project), we had to stick a 4 mm sheet of One Side Team onto a plywood using synthetic resin glue. Because we had no means to hold the OST sheet in place and the glue required some drying time, we literally had to sit on either side of the table for a good 15 minutes. And we did this for the next few projects too. When it was a smaller work, like a DIY photo frame, I had to hold the sticks tightly together for a while before I was convinced that the glue has dried.
That is when I thought I should get my hands on C-Clamps (also called G-Clamps), purely for my gluing needs.
G Clamps
C-Clamps / G-Clamps
Clamps are wonderful tools for holding things together steadily in place while you are trying to work on them.  Whether it is for gluing two surfaces together or to nail them, the clamps come in handy to provide that firm grip which might otherwise not come from even steady hands. The clamps come in different sizes and it is important that you choose those that fit your needs.

I went for the smallest of ones that can open as wide as 1 inch and not more. Highly suited for surfaces of lesser thickness. I have ever since used these clamps successfully for making a wall clock and for laminating wooden surfaces.
Use for C Clamps
C Clamps for basic woodworking and DIY needs
I bought these clamps at Home Depot during my short visit to the US last year. I have also inquired here and these are available in hardware stores and tools shops. There are different types of clamps that are available and C-Clamps are just one of those. It has been an important accessory in my tool kit that has helped reduce the pressure on my fingers and deserved a special mention here.

Do you use clamps for your projects ? I believe they are extensively used even outside of woodworking. If you do use them for your crafting needs, share the details in the comments section. Will certainly love to hear about it.

- Somu

A cordless screwdriver was a perfect gift from my brother-in-law who just returned from Indonesia and is the latest addition to my tool kit.  I thought I was fine with the set of screw drivers that I had, but I was completely wrong. I just realized how much more convenient a power tool like this can make my life. I have been playing with it for the last couple of days and the  tool is really handy. I tried using it in place of the allen key wrench and it works like a charm. What I love is that it has driver bits for all possible screw heads and that means I do not need to keep track of each of the wrenches and hand drivers. I still feel that pre-drilling a pilot hole is essential as I was not able to generate enough power to directly drill the screw in. Maybe I need a self-drilling screw for that.
electric Cordless screwdriver
Cordless screwdriver, with the drill bit set
That said, it certainly eases the effort required by at least a good 40-50% and now am eagerly looking forward to work on my next project.

Here are some facts about this cordless screwdriver :
  • Rotates slower (180 RPMs) than the usual electric drill
  • The tool is strictly for running screws and bolts. It is not a drill
  • This one is single speed and rotates in both clockwise and anti-clockwise direction
  • Completely a DIY tool and unsuitable for professional and everyday prolonged use
  • It is not bulky. It is just as big as the size of my outstretched palm
  • Very easy on the hands and is completely safe to use, considering its lower RPM
  • It is battery operated and the power cord is for only charging the battery
  • Operates at 240V eliminating the need for a voltage step down transformer
  • Comes with 6 twist bits and 17 screwdriver bits 
Don't you think gifting something related to your hobby is a very thoughtful act ? I always ask for a tool when someone asks me what I need as a gift. What do you ask for ? Share your thoughts.

Did you like this post ? Enter your E-mail address and join our growing E-mail list

You may also be interested in

All these tools were bought on a need basis as and when I required them for a specific purpose. These tools largely serve your basic DIY woodworking needs and will certainly help you make those little projects around the house. (Note: This is a repost)
Safety is of prime concern and so you should take necessary precautions. If certain tools need supervision or you are not sure of their application, try to get it done through professionals. Better safe than sorry.
Woodworking hobby tools
Woodworking hobby tools - Electric Drill

Electric Drill

This is certainly a must have tool in the house if you are a DIY lover. It helps serve multiple needs. Be it hanging a painting on the wall, or making a center table, it is the electric drill that paves way by creating that much needed pilot hole. I have used this to install cabinet doors too. The one I use costed me about Rs.700 and comes with very basic features of single speed and clockwise rotation.

Associated Drill bits

The following are the drill bits that I bought over a period of time. All of these cost between Rs.10 to Rs.30 if you buy them separately.
·  Masonry bit for drilling into concrete / brick walls
·  Twist bits for drilling pilot holes
·  Flat wood bit which I used as a counter sink bit
·  Forstner bit for installing European style hinges for cabinets
Tools for DIY
DIY Woodworking tools

Claw Hammer

The use of a hammer is quite obvious. Since the only nails I use are the headless nails, I use the hammer mostly for pounding them into the piece of wood. You can use the claw to pull out any nail or screw.
Oh ! Did I tell you that it doubles up as a kitchen accessory? I use it to break coconuts.

Cutting pliers

I use them for holding the nails in place when I am hammering them into wood. Helps protect my fingers from being smashed.  I also use them to strip off the plastic sheath from the wires while installing my DIY lampshades.

Screw Driver Set

Again another useful tool to have inside the house. Not just for the purpose of woodworking, but also for other requirements at home, these are very helpful. A kitchen hinge that is loose, a glass door that needs installation or a key holder that is not in place can be easily fixed. The entire set costed me only Rs.80.
Essential woodworking hand tools
More tools

Wood Rasp

I remove all the sharp edges in my work using the Rasp. It helps give a slight curve to the edges. For the cabinet door that I installed, I used the rasp to give the edge a half round shape.

Measuring tape

Your projects will never have the symmetry you desire if not for the measuring tape. Sometimes even a couple of mm offset can make your project look awkward and so it is essential you get used to using the tape accurately. Sometimes it is also needed that you are able to quickly shift between mm and inches as the unit of measurement depending on the situation.

L Square

Perfect tool for drawing right angled vertical and horizontal lines.

Hacksaw blade

Serves all my cutting purposes. Again, the wood that I decide to cut is always of minimal thickness for which the hacksaw is very ideal. Not really suited for cutting wood that is beyond 6 mm in thickness. Not that it is impossible, but really makes it difficult to get that clean cut.

Mica / Laminate cutter

If you work regularly with Mica or laminate, this is a very useful tool. I also use it extensively for cutting 4mm One Side Teak sheet. Beyond 4 mm, this tool is ineffective for cutting.
So that’s about the handtools (with the exception of power drill) that I use. All my projects have been built using these basic tools. Will keep adding more tools and accessories to this list in due course.

What are your favorite tools ? I am not referring to just the ones you use for Woodworking. What are the tools that you use for your arts and crafts projects too ? Share your thoughts.

Did you like this post ? Enter your E-mail address and join our growing E-mail list
Linking in : Colours Dekor

My cousin Raji would always ask Preethi, “What would you need from Michaels?” or  “What would Somu need from Home Depot or Lowes?” and we never had an answer. We were doing our DIYs with available materials and resources that we didn’t stop to think what else we would need that can help with the quality quotient of our work.
And so, when she mailed that she has sent me few gifts through my BIL who was visiting Chennai, I was very excited. Not only was she thoughtful in her gesture, but she was also bang on target as to what I would have loved to own.

Woodworking projects for DIY
Woodworking projects
One of the gifts was “The Big Book of Weekend Woodworking” that has 150 easy to do projects. I always roam the internet looking for inspiration and this book had everything to keep me busy for many weekends together. All the projects are easy to do with clear illustrations to aid the hobbyist in me.

The projects are categorized into 12 different categories with kitchen projects, office projects, useful household projects, clocks and more being among them. The illustrations with drawings and patterns are a treat to my itching hands that are of late up to indulging in one project or the other.

I have read the book end-to-end couple of times in the last week itself. Now it is just a question of deciding what I want to make for myself and our home. The book is an inspiration galore and I am way too excited as I figure out the projects that I want to get going with immediately.

Tool Box DIY
DIY Tool box
Rail Planter you can make
A Rail Planter
Serving tray project
Serving Tray
Thanks Raji for the thoughtful gift. The book is a source of inspiration and your gesture a source of encouragement. This book got me thinking about why such knowledge resources are not locally available for an India based hobbyist. But then, I shall save that thought for another day.

Tell me what was your first gift that got you going with your passion. Leave me a comment.

Other useful resources you may be interested in

Picture credit : The pictures were taken from the "The big book of weekend woodworking" book
Linking in : Colours Dekor
- Somu

Some of the common search terms that bring traffic to Woodooz are :
  1. Can I use fevicol as Mod Podge ? (In short, NO. However you can make Mod Podge out of Fevicol sans the quality of a decoupage glue)
  2. What glue to use for furniture making ?
  3. Is white adhesive same as Mod Podge ? (In short, NO)
I have never been sure if my earlier posts have addressed these queries convincingly. So, today I thought I would spend few moments writing about the adhesives that I use for my projects and in a way try to answer the above questions. Before you go any further, it is important to understand that I was neither contacted by Fevicol / Pidilite nor is this post sponsored. Much like the various woodworking tools that I use and write about, am writing about one other tool / accessory that I love working with.

Fevicol MR (White Adhesive)

Because of the various tutorials on the net on how Mod Podge can be made out of white adhesive, it is very common to think Fevicol MR is an alternative to Mod Podge. The truth is, it is not. Fevicol MR is viscous much unlike Mod Podge and though they dry to form an invisible layer, they hardly offer the glossy "protective" finish of Decoupage glue.

This is highly recommended and used for arts and crafts projects. It can be used for joining thin and light weight materials that are less likely to exert too much of opposing force. These are also materials that are mostly handled gently with care.

Papers, cloths, buttons, Sequins, are just about some of the examples.
Fevicol - MR and SH
Fevicol synthetic resin for woodworking / Furniture projects

Fevicol SH (Synthetic Resin Glue)

When you need glue for your wooden joineries, it is better that you use one that is touted as the carpenter's glue. This synthetic resin glue is what I use for all my woodworking projects. Be it for gluing laminate or a 4mm sheet of teak, this has always worked wonders for me. 

It does not offer an instantaneous bond and hence you may have to provide the necessary pressure on the glued surfaces for a while. But once the glue dries, the bond that it creates is very strong. Since I also use only butt joints (apparently the weakest) for my projects, the glue helps prevent the wobble that might otherwise be missing in other strong joinery techniques.
Subscribe to our RSS feed. It is just a click away
Though there are other adhesives like hot glues, contact adhesives that are available, these are the only two that I currently use. And since they serve my purpose for the moment, I have not tried exploring other options that are available.

Update from reader comment:

Here's  the gist of what Kittu, a woodworking hobbyist for 6 years from Deccan Woodworking, had to say about the other types of adhesives available:
  1. Normally wood glue used in US and Europe is called PVA glue. This is  similar in texture to the white adhesive, only it is pale yellow in color. In fact it is referred to as yellow glue in general. Titebond is the most popular brand. Some of the PVA glues have newer versions which are considered water proof.
  2. The other type used is Polyurethane which gives out lots of smell and fumes but it is considered water proof and a must for outdoor applications.
  3. Then we have epoxy glues which are two part resin and activator and mixed just prior to application.
  4. Cyanoacrylate glues are the instant bonding type and occasionally used in wood working. It is more popular with wood turners to seal the surface.
Thanks Kittu for sharing your views. Check out the entire update from Kittu in the comments section.

What do you use ? Think I should try using something else for the bond am looking for ? Leave a comment.

You may also like :

Linking in : Colours Dekor
- Somu

Painter’s Masking tape is commonly used during painting of walls, particularly a feature wall. Considering the adjoining walls have a different colour, the masking tapes help prevent bleeding / dripping of paint onto the other walls on the edges and also to get that perfect much needed straight line effect. This is also used to cover wooden trims, switch panels and plug points.

Prevent bleeding of paint

The masking tape is also a very useful tool while painting wooden furniture or even small wooden crafts. It is especially useful to prevent paint or varnish from dripping onto other surfaces. Both these media are highly viscous and hence any ignored drip can form a blob which will be difficult to eliminate later.
Masking tape on wood
Painter's Masking tape - Avoid dripping / bleeding

The first tool that we bought was an electric drill (Specifications: clock wise rotation, single speed drill. There are more advanced models available though) and two drill bits (one each for concrete and wood).

We have come to realize that it is one of the handiest tools to have around the house, irrespective of whether you are into woodworking. We have hung a clock, a picture and a painting on the wall – professional charges for which would have cost us a good Rs.100 to 300 for each nail drilled. So far, we have used the drill for :

1. Drilling pilot holes for screws
2. Drilling holes for installing hinges
3. Drilling nails / screws into the wall

The availability of the electric drill and the necessary skill to use it has its own day-to-day practical use inside the house eliminating the need to approach a professional carpenter (for installing curtain rods, door knobs, door stoppers, wall hangings etc) / electrician (for installing a bell or lamp shade on the wall).

Most certainly a must have.
- Somu

Know more about us

About Us
Our showroom location
Return and refund policy
Review us on Google

Connect with us

Mail us
Subscribe to our newsletter

Our Address :
Woodooz Home Decors,
3/371, First floor,
Metukuppam, Thoraipakkam,
Old Mahabalipuram Road (OMR),
Chennai - 600097.
Ph : +91 9884070470
Email :
Created By SoraTemplates & MyBloggerThemes